RFID Car alarm: Double layer start protection function
It works like a car alarm(pls note this item without shock sensor alarm, with ACC detecting alarm), but more secure for car security. Once you install the antenna in a hidden position inside the car, as you are the one who knows the place, so only you can disarm the car by taking the identification card to the right position(Sensing distance 5-8 cm ). if your original key was lost or stolen, nobody can drive your car away as they don’t have the identification key to disarm the car. even he got the identification key, but he don’t know where the antenna is, also can’t disarm the car. and if system is triggered such as ignition started illegally, after 8 seconds the buzzer will beep and the LED indicator will flash quickly, and the horn will alert (need to connect with the original car horn or an additional horn),then engine stop,Without the smart key, nobody can ignite your car to drive it away.
2. Auto Arm.
3. Power off memory.
4. Trigger alarming.
5. Service mode.
6. Master card code learning.
7. Identification card code matching.
8. Delete Identification card.
9. Emergency disarm.
1. Working Frequency:125Khz
2. Working voltage: 12V±3V
3. Static current: ≤30mA
4. Working temperature(main unit):-40°C-+85°C
5. Sensing distance: master card:≥8CM; Identification card≥5CM
- Auto-arm and auto-lock engine after ignition off, will ALARM if any ignition started illegally,and 8s later will auto-cut off the electric circuit thoroughly.
- Trigger alarming, buzzer will beep and the LED indicator will flash if system is triggered such as ignition started illegally.
- Concealed sensing place, the sensing antenna installed in a concealed place where only you know.
- Everlasting of smart card, no need battery inside the card and static-current proof to make sure the everlasting of smart card.
- Without the smart key, nobody can ignite your car to drive it away.