When reversing,the image is transmitted to the monitor wirelessly. There is no need to run any wires from the camera to the monitor.
The universal vehicle backup camera have HD video,can shows the date and time when it is in the mode of standby.
Normally you do not need to pair this rearview backup camera and monitor, the defaulted value is that paired them well to the first channel before delivery.
4.3-Inch Digital panel
Power Supply:DC 5V
Effective pixels:800xRGB x 480
Parking guide line(on/off)
Image device:1/3′ CMOS
TV System: PAL:25f/s NTSC:30f/s
Pixels:640 X 480
Sync.System: 700TV Lines
Current consumption: Max 250mA
Power Supply : DC 12V~24V
Free viewing angle: 120°
1. 4.3inch dash monitor
2. Weatherproof rearview camera
3.Windshield mount for dash monitor only
4. 12V/24V power adaptor
5. Users manual
- Parking safely&effortlessly!Wireless rear view camera kit,you will be able to park your car easily even in the tiniest parking spots.Won’t waste too much time and without risking of damaging it.
- Wireless design&easy to install,doesn’t have complex problem about wiring.4.3inch LCD rear view monitor connect a backup cameras by a wireless transmitter.,which replace the complicated and long video cables.Make all things much easier.
- IP68 weatherproof reverse backup camera, mounts to license plate frame and offers 120-degree viewing angled,suitable for most cars,camping cars,even RVs.The rear-view camera doesn’t have any interference with other wireless devices,the wireless distance is about 32.8ft in open areas.
- The 4.3′ LCD monitor shows the live picture clearly about the back of the car, and comes with a suction cup mount for easy placement.Special designed of backup camera recorder to help reduce blind spots.
- Strong force and reusable car monitor mount.The Monitor with strong adhesive silicone bracket mount enable to mount it on windshield or dashboard. After long time using, the monitor holder may become dirty and non-sticky,please wash the suction pad and reuse again.